binder

英 [ˈbaɪndə(r)]

美 [ˈbaɪndər]

n.  活页夹; 装订工; 装订机; 黏合剂; 结合剂

复数：binders　

TEM4TEM8化学

Collins.1 / BNC.12878 / COCA.12699

牛津词典

noun

• 活页夹
  a hard cover for holding sheets of paper, magazines, etc. together
  1. a ring binder
     活页夹
• 装订工；装订机
  a person or machine that puts covers on books
• 黏合剂；结合剂
  a substance that makes things stick or mix together in a solid form
• （谷物）割捆机
  a machine that fastens wheat into bunches after it has been cut

柯林斯词典

• 活页夹
  Abinderis a hard cover with metal rings inside, which is used to hold loose pieces of paper.

英英释义

noun

• something used to tie or bind
  Synonym:ligature
• holds loose papers or magazines
  Synonym:ring-binder
• a machine that cuts grain and binds it in sheaves
  Synonym:reaper binder
• something used to bind separate particles together or facilitate adhesion to a surface

双语例句

• The coatings for digital color ink-jet printing paper were prepared using nanometer SiO_2 and PVA as pigment and binder.
  以纳米二氧化硅为颜料，PVA为胶粘剂，添加阳离子助剂，制备了数码彩色喷墨打印纸专用涂料。
• Binder is to form a loose abrasive grinding solid materials, there are two types of inorganic and organic.
  结合剂是把松散的磨料固结成磨具的材料，有无机的和有机的两类。
• The present investigation is focus on the preparation process of silica-based ceramic mold using silica sol as binder.
  主要研究了以硅溶胶为粘结剂的硅基陶瓷型制备工艺。
• Calcium carbonate was used as the phosphate binder.
  研究期间，磷酸盐的结合剂为碳酸钙。
• The effect of fly ash during the hydrating and hardening process of composite binder was studied.
  分析了粉煤灰在复合胶凝材料水化硬化过程中的作用。
• And effects of various factors on properties of the binder and its bonded core sand were also discussed.
  使用创新的干法复合反应工艺合成了改性淀粉粘接剂，讨论了各因素对改性淀粉及其粘接芯砂性能的影响。
• The effect of densified silica fume on low workability concretes under different water to binder ratio was studied.
  在不同的水胶比条件下，考察了凝聚态硅灰对低工作性混凝土强度发展历程的影响。
• It is mostly used as binder and curing agent in the production of hi-temp refractory materials for kiln.
  主要用于高温窑炉耐火材料的粘结剂和固化剂。
• Adhesive layer materials for different conditions may be recommended by using of direct shear test and pullout test with SBR modified emulsion asphalt, SBS modified asphalt and Japan epoxy binder.
  采用SBR改性乳化沥青、SBS改性沥青和日本环氧粘结剂三种层间粘结剂，利用直剪试验和拉拔试验进行层间抗剪性能分析，可以推荐出适合不同条件的粘结层材料。
• The final operation in propellant manufacture is the curing of the binder.
  制造推进剂的最后操作是粘合剂的固化。